HC24 - INSTALLATION GUIDES
Sonos Move
1152 Views •Dana Keypad
1131 Views •Wireless Door/Window Contact
902 Views •Doorbell Chime
884 Views •IQ Panel 2 Plus
875 Views •Smoke Detector
868 Views •Sonos One
840 Views •Occupancy Sensor
831 Views •Guardian Camera
827 Views •Video Doorbell
821 Views •Indoor Dome Camera
818 Views •Outdoor Bullet Camera
817 Views •Relay Module
790 Views •Lighting Keypad
782 Views •PIR Motion Sensor
773 Views •Inline Switch/Dimmer
766 Views •Sonos Arc
763 Views •Sonos Roam
756 Views •Main Repeater
749 Views •Danalock
741 Views •INSTALLATION VIDEO
PRODUCT OVERVIEW
Equipped with speakers, a microphone, and advanced video and audio features, the ADC Guardian Camera is a wide-angle camera with a full 180° field of view. A 6 MP image sensor and digital pan, tilt, and enhanced zoom capabilities give users true high definition video even when viewing zoomed-in live feeds. With a clean, modern design, the camera also features a call-out button. One tap initiates a Two-Way Audio call with other users on the account via the Alarm.com app.
The camera uses echo cancellation to block unwanted noise for a seamless conversation experience. With Bluetooth-enabled speakers, customers can also use the camera to stream music from any mobile device.
SPECIFICATIONS
Power Requirement: 12VDC, 12W.
WiFi Network (2.4 or 5.0 GHz).
Angle of View: 180°.
REQUIREMENT
ADC Guardian Camera
230VAC Socket Outlet by Installation Point.
UNBOXING THE ADC GUARDIAN CAMERA
Inside the package, you should find:
ADC Guardian Camera
Power Adapter
Plug Adapter(s)
Manual
DO’S AND DON’TS OF GUARDIAN CAMERA INSTALLATION
The Guardian Camera can be installed almost anywhere, e.g. Living Rooms, Dining, Kitchen, or in the baby’s bedroom.
The Guardian Camera should be kept in a place with minimal traffic, and it’s cable kept out of the way of movement. A suitable spot is with the decor (plants or turntable) on a cupboard
DO NOT install the Guardian Camera in an area prone to wetness.
INSTALLATION STEPS
This is one of the easiest installations you will do.
Step 1
Once a suitable spot has been discovered, place the camera there.
Step 2
Slide a suitable plug adapter onto the power adapter. This depends on the type of socket outlet you have.
Step 3
Put your index finger in the hole on the latch, and gently pull the latch.
Step 4
Once free, put the barrel plug of the Power Adapter through the latch hole, and plug into the power plug of the camera.
Step 5
Plug the attached Plug Adapter to the wall socket and turn it on.
You will hear a click from the ADC Guardian Camera and the Status LED should start flashing red.
Step 6
Gently push the latch back into place.
Views | |
---|---|
827 | Total Views |
0 | Members Views |
827 | Public Views |
Actions | |
---|---|
0 | Likes |
0 | Dislikes |
0 | Comments |
Share by mail
Please login to share this webpage by email.
To install this Web App in your iPhone/iPad press and then Add to Home Screen.
