Dana Keypad105 Views •
IQ Panel 2 Plus90 Views •
Smoke Detector89 Views •
Relay Module85 Views •
Doorbell Chime84 Views •
Wireless Door/Window Contact84 Views •
Video Doorbell84 Views •
Occupancy Sensor79 Views •
Inline Switch/Dimmer78 Views •
Guardian Camera76 Views •
Outdoor Bullet Camera75 Views •
Indoor Dome Camera75 Views •
Main Repeater74 Views •
Danalock73 Views •
PIR Motion Sensor73 Views •
Inline Dimmer72 Views •
Lighting Keypad70 Views •
Sonos One68 Views •
Sonos Five66 Views •
Sonos Roam64 Views •
Equipped with speakers, a microphone, and advanced video and audio features, the ADC Guardian Camera is a wide-angle camera with a full 180° field of view. A 6 MP image sensor and digital pan, tilt, and enhanced zoom capabilities give users true high definition video even when viewing zoomed-in live feeds. With a clean, modern design, the camera also features a call-out button. One tap initiates a Two-Way Audio call with other users on the account via the Alarm.com app.
The camera uses echo cancellation to block unwanted noise for a seamless conversation experience. With Bluetooth-enabled speakers, customers can also use the camera to stream music from any mobile device.
Power Requirement: 12VDC, 12W.
WiFi Network (2.4 or 5.0 GHz).
Angle of View: 180°.
ADC Guardian Camera
230VAC Socket Outlet by Installation Point.
UNBOXING THE ADC GUARDIAN CAMERA
Inside the package, you should find:
ADC Guardian Camera
DO’S AND DON’TS OF GUARDIAN CAMERA INSTALLATION
The Guardian Camera can be installed almost anywhere, e.g. Living Rooms, Dining, Kitchen, or in the baby’s bedroom.
The Guardian Camera should be kept in a place with minimal traffic, and it’s cable kept out of the way of movement. A suitable spot is with the decor (plants or turntable) on a cupboard
DO NOT install the Guardian Camera in an area prone to wetness.
This is one of the easiest installations you will do.
Once a suitable spot has been discovered, place the camera there.
Slide a suitable plug adapter onto the power adapter. This depends on the type of socket outlet you have.
Put your index finger in the hole on the latch, and gently pull the latch.
Once free, put the barrel plug of the Power Adapter through the latch hole, and plug into the power plug of the camera.
Plug the attached Plug Adapter to the wall socket and turn it on.
You will hear a click from the ADC Guardian Camera and the Status LED should start flashing red.
Gently push the latch back into place.
To install this Web App in your iPhone/iPad press and then Add to Home Screen.