The IQ Panel Plus 2 is the latest technology in home automation-security systems. This 7” HD Touchscreen has exciting new features you can’t get anywhere else, such as an inbuilt camera for live view and answers, a dual System Radio Frequency (SRF) with Power G; the best wireless protocol available in the market providing 4x speed compared to traditional wireless protocols. It also comes with military grade 2-way encryption, reliable connection and automatic signal adjustment, as well as intervention circumvention to avoid loss of connectivity
7” HD touchscreen
5MP in-built camera
1280 x 800 Resolution
Capacitive glass multi-touchscreen
Lithium Polymer 3200mAh Battery Capacity
Power supply- 5v - 5.5v 1000mA DC adapter, Input 100-240VAC 50/50Hz
Stereo speakers (unified audio system)
Dual path connectivity- Wi-Fi, LTE
Panel Wall Mount
Table Stand (Included in the box)
Cable run from power supply point to proposed installation point
Strong Wi-Fi connection
WALL MOUNT OPTION
Insert your thumb or finger under the opening on the back cover and firmly pull up to remove. This cover is not needed for wall mount.
Press tabs on the bottom of the panel and pull apart to remove the back plate and then install your mount to the wall using your screwdriver.
Note: The IQ Panel must be installed not more than 5 metres away from the entrance point. This is so there is interaction between your Danalock and the IQ Panel. You will need a z-wave repeater
Hang the front of the panel with the hanging strap on the back plate [the front in this case will mean the touchscreen part of the panel].
Connect the power cord to the power point at the back of the panel, while still hanging from the strap.
Latch the bottom of the panel into place, ensuring the power cord is routed into the wall and not pinched.
Swing the panel upward and then snap the tabs on top by firmly pinching “diagonally and down” from the top front of the bezel at all 4 snap tab locations to ensure proper closure. You will hear a “pop” or “snap” sound when each tab has closed properly and the gap along the top should be tightly seated.
Important: Note that not properly closing the panel could result in damage to the backplate or false panel tampers.
Your IQ Panel is ready to be configured.
TABLE STAND OPTION
Insert your thumb or finger under the opening on the back cover and firmly pull up to remove.
Plug in the power cable, into the jack next to the terminals.
Route the cable under the hook next to the battery and then through the strain relief opening.
Replace the cover by inserting the top first, making sure the cable passes under the opening provided and firmly press down on the bottom until the cover “snaps” into place. You should hear a ‘click’ sound when the latch goes into place.
Insert the table stand into the mounting holes and push upward until it snaps into place.
To install this Web App in your iPhone/iPad press and then Add to Home Screen.