RA2 Select Main Repeater allows for setup, control, and monitoring of RA2 Select devices from a smartphone or tablet using the Lutron App. Using a RA2 Select Main Repeater allows devices to be part of a whole house solution that can be controlled remotely from anywhere in the world.

SPECIFICATIONS

• 5V ⎓ 300mA.

REQUIREMENT

• RA2 Select Main Repeater.

• Power supply (230VAC) to plug the adapter to.

• LAN port, that has internet access. This could be on a router or switch or LAN outlet which is connected to a router.

• CAT5, CAT5e or CAT6 patch cord.

• The Homeowner's smartphone (with internet connection).

• Lutron App.

INSTALLATION STEPS

Step 1

Decide on the spot you wish to place your inline, preferably a rack or a console. This spot needs to be close to a power socket and a LAN port.

Step 2

Plug the patch cord to the LAN port on the Main Repeater, and plug the other end to the LAN outlet.

Step 3

Plug the adapter to the Power Jack first, and then plug the other end to the socket.

Step 4

Turn ON the socket.

Step 5

The Light will come on and flash for 15 seconds, then become steady. Your Main Repeater is ready to be configured.